Skip to content

Planning Evaluator#

Purpose#

This package provides nodes that generate metrics to evaluate the quality of planning and control.

Inner-workings / Algorithms#

The evaluation node calculates metrics each time it receives a trajectory T(0). Metrics are calculated using the following information:

  • the trajectory T(0) itself.
  • the previous trajectory T(-1).
  • the reference trajectory assumed to be used as the reference to plan T(0).
  • the current ego pose.
  • the set of objects in the environment.

These information are maintained by an instance of class MetricsCalculator which is also responsible for calculating metrics.

Stat#

Each metric is calculated using a Stat instance which contains the minimum, maximum, and mean values calculated for the metric as well as the number of values measured.

Metric calculation and adding more metrics#

All possible metrics are defined in the Metric enumeration defined include/planning_evaluator/metrics/metric.hpp. This file also defines conversions from/to string as well as human readable descriptions to be used as header of the output file.

The MetricsCalculator is responsible for calculating metric statistics through calls to function:

Stat<double> MetricsCalculator::calculate(const Metric metric, const Trajectory & traj) const;

Adding a new metric M requires the following steps:

  • metrics/metric.hpp: add M to the enum, to the from/to string conversion maps, and to the description map.
  • metrics_calculator.cpp: add M to the switch/case statement of the calculate function.
  • Add M to the selected_metrics parameters.

Inputs / Outputs#

Inputs#

Name Type Description
~/input/trajectory autoware_auto_planning_msgs::msg::Trajectory Main trajectory to evaluate
~/input/reference_trajectory autoware_auto_planning_msgs::msg::Trajectory Reference trajectory to use for deviation metrics
~/input/objects autoware_auto_perception_msgs::msg::PredictedObjects Obstacles

Outputs#

Each metric is published on a topic named after the metric name.

Name Type Description
~/metrics diagnostic_msgs::msg::DiagnosticArray DiagnosticArray with a DiagnosticStatus for each metric

When shut down, the evaluation node writes the values of the metrics measured during its lifetime to a file as specified by the output_file parameter.

Parameters#

Name Type Description
output_file string file used to write metrics
ego_frame string frame used for the ego pose
selected_metrics List metrics to measure and publish
trajectory.min_point_dist_m double minimum distance between two successive points to use for angle calculation
trajectory.lookahead.max_dist_m double maximum distance from ego along the trajectory to use for calculation
trajectory.lookahead.max_time_m double maximum time ahead of ego along the trajectory to use for calculation
obstacle.dist_thr_m double distance between ego and the obstacle below which a collision is considered

Assumptions / Known limits#

There is a strong assumption that when receiving a trajectory T(0), it has been generated using the last received reference trajectory and objects. This can be wrong if a new reference trajectory or objects are published while T(0) is being calculated.

Precision is currently limited by the resolution of the trajectories. It is possible to interpolate the trajectory and reference trajectory to increase precision but would make computation significantly more expensive.

Future extensions / Unimplemented parts#

  • Use Route or Path messages as reference trajectory.
  • RSS metrics (done in another node https://tier4.atlassian.net/browse/AJD-263).
  • Add option to publish the min and max metric values. For now only the mean value is published.
  • motion_evaluator_node.
    • Node which constructs a trajectory over time from the real motion of ego.
    • Only a proof of concept is currently implemented.
Back to top